Tec term 3

14/09/18

Tech term 3 2018

What we did in tech during this term was working on 3D printing and puzzle work.

And what we did to do our puzzle was having three rectangle that was already cut for us and so what we did to do the rest of the puzzle was using rulers and a pencil to line it horizontal, vertical and diagonally so we know where the middle dot will be.

The top photo was the start of our project and the photo that the project is put together is the finished puzzle the we made.

It was pretty hard and messy to do this project and we had to Cut it out, File it, polish it, It took a lot of work just to do this project but we ended very well and luckily finished everything that took a lot of times to do.

Three piece puzzle

28/08/18

Three piece puzzle:

We made a three piece puzzle but what we did to start it off with was a planing sheet.

We had to rule it very straight diagonally, horizontal and vertical so we know where the middle dot is.

And so after we finished doing our planning sheet we had to do the same thing on the 3D wood we got given from our teacher but we had three wood we had to line up but three different ways Diagonally, Horizontally and Vertically.

After we had found the centre of the wood we had to do three different shapes so we can cut out, and here were the different shapes.

We made this using rulers, pencils and different types of cutting tools.

Tech 2018

Tech 2018 T3

In technology we have been working on 3D printing and what we learnt was how to download how to use the website Tinkercad and Thingiverse and Thingiverse take us to a website that you can get Ideas from to make a good 3D print.

Tinkercad is a website that you have to create anything you like and to see how you would like it to look when it comes out.

Here is one of them that I printed